SPEED 12|5 / 12|7 / 20|8 / 20|11 / 32|10 linear
Linear drives with accelerations up to 1g for minimum job times
- NEW // Patented registered concept for thread whirling –
highest surface quality and precision, 35% more durability - Linear drives in the X1 and X3 axes for the highest precision
- 40 m/min rapid traverse and 10 m/s2 axis acceleration
- Short setup times, easy operation
- Two C-axes and up to 24 rotating tools in the standard version
- Up to three tools in simultaneous operation
- Three slides with driven tools, one of which is for rear-sided
machining - Up to three Y-axes available
Processing Examples
SPEED 20|8 linear with two Y-axes and two C-axes
Technical Data
SPEED 20|8 linear with two Y-axes and two C-axes
SPEED 12|5 linear |
SPEED 12|7 linear |
SPEED 20|8 linear |
SPEED 20|11 linear |
SPEED 32|10 linear |
||
|---|---|---|---|---|---|---|
DMG SLIMline® Panel with 15" screen |
||||||
SPEED 20|11 linear: Fanuc 160i, SPEED 20|8 / 32|10 linear: Fanuc 310is |
||||||
| * optional | ||||||
| Max. turning diameter | mm |
12 (15)* |
12 (15)* |
20 (25)* |
20 (25)* |
33 (36)* |
| Max. rotational speed | rpm |
12,000 |
12,000 |
10,000 |
10,000 |
8,000 |
| Drive power (S2 30 min / S1) | kW |
3.7 / 2.2 |
3.7 / 2.2 |
5.5 / 3.7 |
5.5 / 3.7 |
7.5 / 5.5 |
| Rapid traverse of the axes | m/min |
40 |
40 |
40 |
40 |
40 |
| Axes acelleration | m/s2 |
10 |
10 |
10 |
10 |
10 |
| Longitudinal Z-axes | mm |
120 |
120 |
240 |
240 |
320 |
| Controlled axes (linear / C-axis) | 5 / – |
5 / 2 |
6 / 2 |
9 / 2 |
8 / 2 |
|
| DMG ControlPanel with 15" screen | ||||||
| SPEED 12|5 / 12|7 linear: Fanuc 16i | ||||||
