DMU 60 / 80 / 125 / 160 FD duoBLOCK®
Mill & Turn: milling and turning on one machine
- With all the advantages of the duoBLOCK® design
- Milling and turning in one clamping with DirectDrive
technology
and electronic impact cycle - 5-axis simultaneous milling with a milling / turning
table, an
NC-controlled B-axis in the standard version and an A-axis*
or 5X torqueMASTER®* with up to 1,100 Nm - Fast, vertical chain magazine (DMU 160 FD duoBlock® with
a shelf magazine) - Clamping hydraulics* for the milling / turning table
- Universal tool measurement in the work area for milling
and turning tools*
Processing Examplese
Aerospace milling / turning machining for work pieces up to 3,000 kg
(DMU 160 FD duoBLOCK®)
Fast, vertical chain magazine
Technical Data
Aerospace milling / turning machining for work pieces up to 3,000 kg
(DMU 160 FD duoBLOCK®)
Fast, vertical chain magazine| DMU 60 FD | DMU 80 FD | DMU 125 FD | DMU 160 FD | ||
|---|---|---|---|---|---|
| * optional, ** optional: 8,000 / 10,000, *** optional: HSK-A63 up to 180 pockets, HSK-A100 up to 120 pockets | |||||
| Axis X | mm | 600 | 800 | 1,250 | 1,600 |
| Axis Y / Z | mm | 700 / 600 | 800 / 800 | 1,000 / 1,000 | 1,250 / 1,000 |
| Main drive (40% DC) | kW / Nm | 29 / 130 | 29 / 130 | 44 / 288 | 44 / 288 |
| Max. rotational speed | rpm | 12,000 | 12,000** | 10,000 (8,000)* | 10,000 (6,300)* |
| Rapid traverse X / Y / Z / feed | m/min | 60 | 60 | 60 | 60 |
| Magazine pockets | 40 (60 / 120 / 180)* | 40*** | 40*** | 60 (120 / 180 / 240)* | |
| Milling/turning measurements / load weight | mm / kg | ø 700 / 600 | ø 800 / 1,000 | ø 1,250 / 2,000 | ø 1,500 / 3,000 |
| Table rotational speed in turning operations | rpm | 1,200 | 800 | 500 | 300 |
| DMG ERGOline® Control with a 19" screen and 3D-software | |||||
| DMU 60 / 80 / 125 FD: Siemens 840D solutionline | |||||
| DMU 160 FD: Siemens 840D solutionline, Heidenhain MillPlus iT (15" screen) | |||||
