LASERTEC 40 PrecisionTool
Creation of chip breaker cutting geometries
in PCD / CBN precision tools
- Flexible production of complex chip breaker geometries
in PCD as well
as the manufacture of hard metal inserts for serial production - Prototyping of complete geometries in hard metal
exchange inserts
in < 2 hours - Diode-pumped Nd:YAG-Laser (12 W) with basic mode
- Feasibility of surface qualities up to Ra = 0.6 μm
- High-resolution camera system for the automatic fine-tuning of components
- Direct programming from 3D-CAD data
- LASERSOFT 3D with the DMG ERGOline® Control – panel with special software features: automatic video setup and 3D-contour lasering
Processing Examples
Special device for „cavities“ for the serial production of cutting inserts
Technical Data
Cutting geometries in hard-metal exchange inserts
Special device for „cavities“ for the serial production of cutting inserts| LASERTEC 40 PrecisionTool | ||
|---|---|---|
| * optional, ** depending on the material | ||
| Number of axes (mechanical / optical) | 3 / 3 | |
| Axis X / Y / Z | 400 / 300 / 500 | |
| Beam course* | engaged beam | |
Bass control* |
optical sensor | |
| Work area of the laser | mm |
60 / 60 |
| Automatic cogging | yes | |
| Min. wall angle | degree |
0** |
| Laser power | W |
12 |
| DMG ERGOline® Control with a 19" screen and 3D-software | ||
| LASERSOFT 3D | ||
